Back to top

1985 Evelyn 25

Lyme, Connecticut

This boat does not come  with an outboard but a 4 hp will fit on the back.

Basic Boat Info

Make: Evelyn
Model: 25
Year: 1985
Condition: Used
Category: Sail
Construction: Fiberglass
Boat Hull ID: EFM25001K485
Has Hull ID: Yes

Dimensions

Length: 25 ft
Length Overall: 24'9 ft
Waterline Length: 21'5 ft
Beam: 8'8 ft
Min Draft: 4'4 ft
Displacement: 2,600 lb
Ballast: 1,100 lb

Other

Boat Class: Racers

Contact

David Pugsley
Yachts New England

Office

Yachts New England
250 Hamburg Rd
Lyme, Connecticut, US, 06371
Tel:860-662-0272
Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.


Tralier

Custom built professional TRIAD trailer.

5200 pound capacity, hydraulic surge breaks, super lube bearing, hot dipped galvanized frame.

2000 pound Aframe Shelby jack, bow stop with built in ladder.

2- 2000 pound stabilizer jacks, galvanized rims.

Very low operating time, Its in new condition.

Mast And Rigging

Hall Spars double spreader, Keel stepped mast with airfoil, spreaders.

1x19 standing rigging SS turnbuckles.

Internal genoa /spinnaker  halyards.

Internal main halyard.

Spinnaker pole lift pole track on mast.

4/1 boom vang.

Main Cunningham system.

Running rigging consisting mainsheet and traveler control lines, two jib sheets 2 spinnaker sheets with shackles, topping lift with shackle, forguy "Harken" system, backstay and Cunningham control lines.

 

 

Deck Hardware

Two 2- speed combination primary & halyard winches with cleats.

Halyard stoppers.

Winch handle.

Two genoa tracks with adjustable cars and control lines.

Two turning blocks.

Harken ball bearing traveler and 2/1 Harken control system.

4/1 Harken ratchet mainsheet system.

Spinnaker gear consisting of spinnaker pole, topping lift forguy system led aft, blocks for sheets/guys with two spinnaker/genoa internal halyards.

Complete 18 inch single life line assemble with custom bow pulpit and stanchions,

Custom stainless stemhead.

Mast mast collar and mast boot.

Inboard rudder with laminated tiller.

Three mooring cleats.

Split backstay bridle with 4/1 adjuster.

 

 

Keel/Ballast/Rudder

Hi lift, low drag 1100 lb. lead keel attached 6" deep hull stub using stainless studs.

Large area keel for outstanding upwind performance.

Keel attachment area strengthened with use of unidirectional and triaxle fiberglass stiffeners.

Unidirectional fiberglass rudder with high strength post.

Interior

Complete interior with V-birth and 2-6'3" setee berths with 3" cushions.

Storage compartment outboard of main berth.

 

Hull and Deck

Gelcoated fiberglass hand laid up hull with "Divenycell" core.

Unidirectional fiberglass and carbon fiber stiffening.

Gelcoated fiberglass deck with non-skid area.

Teak exterior trim, black anodized custom extruded flat genoa track toe rail.

Small Lexan cabin top ventilation  hatch.

Large sliding main hatch with with acrylic weatherboard.

Tinted acrylic cabin windows.

No cockpit lockers to weaken deck, leak or add unnecessary weight.

 

Sails

2 Main sails

spinnakers

2 head sail

 

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
Additional Contact Information

David Pugsley 860-662-0272


$
%
$
Disclaimer This calculator is intended solely for general informational purposes, and to provide a rough estimate based on the information you provide. You should not base your decision on this estimate alone.